Focusrite iTrack Dock Studio C01 iPad Studio Set: Microfoon, Headphones, Standaard, Kabel

◾Reference quality headphones
◾Extended frequency response
◾Adjustable fit
◾Closed back design to prevent audio spill when recording
◾Mini-jack to 1/4" jack adapter included
◾Large-diaphragm condenser microphone
◾3 m cable included
◾Mic stand adaptor
iTrack Dock
USB MIDI Port
MIDI controllers we have tested with iTrack Dock’s MIDI port:
◾Novation Launchpad S
◾Novation Launchkey range (mini, 25, 49, 61)
◾Novation Impulse range (25, 49, 61)
◾Novation Launchpad mini
◾Novation Launch Control
◾Novation SL MkII range (25, 49, 61) Please note, the Novation SL MKII range needs external power to work with the iTrack Dock
◾Akai MPK mini
◾M-Audio Oxygen range (25, 61)
◾M-Audio Axiom Air mini
◾Alesis Q49
◾Alesis QX61
◾Akai Max 49 Please note, the Akai Max 49 needs external power to work with the iTrack Dock

Known incompatible controllers

◾Korg microkey 37
◾Korg MS20ic

Please see this answerbase article for further information on compatible MIDI controllers.

Analogue Input Performance - Mic

Frequency Response 20Hz - 20kHz +/- 0.2 dB (minimum gain)
THD+N < -99dB (minimum gain, -1dBFS input with 20Hz/20kHz bandpass filter)
Equivalent Input Noise (EIN) < -125dBu CCIR-RMS (measured at maximum gain with 150 ohm termination)
Gain Range -4dB to +46dB (dBFS / dBu) ±1dB
Max Input Level >+4dBu (at 1% THD)

Analogue Input Performance - Line

Frequency Response 20Hz - 20kHz +/- 0.2dB (minimum gain)
THD+N < -98dB (min gain, -1dBFS at output and 20Hz/20kHz bandpass filter)
Noise (NiPoS) <-104 dBFS CCIR-RMS (measured at min. gain with 50 ohm termination)
Gain Range -22dB to +28dB (dBFS / dBu) ±1dB
Max Input Level >+21dBu (at 1% THD)

Analogue Input Performance - Instrument

Frequency Response 20Hz - 20kHz +/- 0.2dB (minimum gain)
THD+N <-90dB (min gain, measured at Max Input Level -1dB, 20Hz/20kHz bandpass filter)
Noise <-104dBu CCIR-RMS (measured at min. gain)
Gain Range -16dB to +34dB (dBFS / dBu) ±1dB
Max Input Level >+14dBu (at 1% THD)

Analogue Output Performance

Nominal Output Level 0dBFS = >+10dBu, balanced
0dBFS = >+4bBu, unbalanced
Frequency Response 20Hz - 20kHz +/- 0.2dB
THD+N < -100dB, balanced (0dBFS input 20Hz/20kHz bandpass filter)

Digital Performance

Clock sources Internal clock only
D-A Dynamic Range 105dB 'A-weighted' (all outputs). Converter chipset D-A dynamic range 114dB
Supported sample rates 44.1 KHz, 48 KHz, 96 KHz
24 Bit

Input Metering

Ring LED lit Green Signal present (-24 dBFS)
Ring LED lit Red Signal overload (0dBFS), peak held for approximately 1 second

Weight and Dimensions

◾Height 64mm
◾Width 280mm
◾Depth 168
◾Weight 0.7 Kg